Fiber-Coat Deck Co
1635 W Lambert Rd Unit B
La Habra, CA 90631

(657) 706-2299 fibercoatdeckco@yahoo.com

Serving Huntington Beach Area

  1. Repairs That Your Deck May Need Before Waterproofing

    Homeowners who have an outdoor deck on their property need to perform some type of regular maintenance if they want to keep it in good condition. If you’re one of them, you will most likely notice signs that it needs to be repaired. Horizontal surfaces that are exposed to the weather can be hard to keep in good condition, which is why they also need to be waterproofed. It may eventually have areas with standing water. Freeze and thaw cycles can also create problems. But while there are products out there that can waterproof your deck, there are some things you need to check because it may need to be repaired.

    plywood decking damaged

    How to Know if Your Deck Needs Repair

    The first thing you should look for is any signs of rot, especially if you have a wooden deck. It can get inside the wood and can weaken the deck’s overall integrity. Many fatal accidents occur if the deck has enough rot to cause a collapse. Check the wood for any soft spots. If it feels spongy, it has most likely fallen victim to rot. If it looks like it’s in a small enough section, it may be possible to take out the affected area before it spreads to the rest of the wood panels.

    You also want to look for any cracked or damaged boards, which is a common occurrence for wooden decks. In most cases, cracked boards occur over time as a result of regular wear and tear as it’s exposed to traffic and the elements. You should check all of the high-traffic areas on your deck, but you want to look at all of the low-traffic areas as well because they can also experience this type of damage. If you see any cracked or damaged boards, just remove and replace them with new panels.

    The last thing you should check are the connectors and fasteners that are used to keep your deck together. In addition to nails and screws, metal connectors are used to keep the deck’s components secure. It’s sometimes possible for these connectors to become rusted. If that’s the case, they need to be replaced. Connectors can also become loose over time and are much easier to fix. An easy way to look for this kind of problem is to see if there are any wobbly nails or loose stair steps. If you notice any of these signs, just tighten the screws or use new nails to fix the problem.

    What You Can Do to Maintain Your Deck

    A properly built and waterproofed deck won’t require a great deal of maintenance, but it doesn’t mean you should ignore any of the regular tasks related to deck repair and maintenance. Here are some things you can do to keep your deck in good condition:

    • General Deck Inspection — You should regularly inspect your deck to make sure everything is working properly. This includes the deck perimeter, as well as any lighting or electrical outlets. You also want to make sure that any sources of fire and heat are kept away from flammable areas and are protected by a non-flammable pad.
    • Detailed Deck Inspection — Look for the deck’s stability in different areas. This includes the deck boards, stairs, support posts, as well as any joists under the deck and ledger board that attach the deck to the property.
    • Deck, Stair, and Railing Inspection — Make sure the deck stairs look even without sagging, swaying, or movement. Check the railings or handrails to make sure they’re firmly in place. You also want to make sure the steps are securely attached and aren’t decayed.
    • Deck Cleaning — Removing any dirt and debris is an important step in maintaining your deck, especially when it comes to its appearance. But the presence of certain types of organic matter (such as leaves or moss) can be a slip hazard. In most cases, all you need is a mild household cleaner that has been diluted in water and a soft brush or broom that you can use for scrubbing.
    • Deck Waterproofing — The amount of time and money that’s needed to keep your deck waterproofed will depend on what type you have on your property. Wooden decks will need to be sanded and stained on an annual basis to maintain their integrity and appearance. If you’re applying a liquid coating over a concrete deck, it will need to be re-applied regularly.

    If you’re looking for one of the best places for deck waterproofing in Los Angeles, be sure to get in touch with the Fiber Coat Deck Company.


  2. Concrete Waterproofing or Replacement: Which One is Right for You?

    According to research, concrete is the most widely used construction material in the world. It’s durable, resilient, and versatile. It can also be used in a number of applications (including both indoor and outdoor flooring), but it’s not immune to damage. Cracks, surface defects, scaling, and other visible signs of deterioration can happen over time.  It can be the result of several different factors. Some of them can include:

    • Freeze-thaw cycles.
    • Exposure to acids and salts.
    • Heavy traffic over sustained periods of time.

    Concrete resurfacing is one of the methods used by builders and contractors to make damaged concrete look new again, but so is concrete replacement. If you have damaged concrete, you might be wondering which one is a better option.

    cracked concrete

    Differences Between Concrete Resurfacing and Concrete Replacement

    Concrete resurfacing is a process that involves adding a coating of concrete on top of an existing slab. You can also choose from a variety of colors, patterns, and textures. The entire process can take anywhere from 30 minutes to a few days (depending on how long the concrete takes to dry enough to allow foot traffic). Concrete resurfacing is a great option for floors that have small cracks, chips, or discoloration. But larger cracks must be fixed before a resurfacing product can be applied. The surface must also be level and not have any crumbling.

    Concrete replacement is a better option if the surface has a large number of damaged areas. It’s also a better choice if your surface has any spalling, wide holes, or structural breaks. In this case, the old concrete is removed completely and is replaced with a new slab. It’s an ideal option for concrete surfaces that are at least 20 years old have been previously treated with resurfacing or patching. It’s a more permanent solution, especially if the surface experiences a great deal of traffic.

    Industrial concrete mixes take 24-48 hours to set, but it takes approximately 28 days for it to cure well enough for it to be walked or driven over. Concrete replacement will last longer. Compared to resurfacing, it won’t need any repairs. It is, however, a more expensive option because you have to consider the time it takes to remove the existing concrete and pour a new slab.

    What to Consider Before Replacing or Resurfacing Your Concrete

    While replacing your concrete is a more permanent solution, not every type of damage requires a complete tear-down. But not every problem can be fixed with concrete resurfacing. You should consider the following factors before you make a decision on whether to replace or resurface your concrete:

    • The condition of the concrete — This is an important step in determining whether it can be resurfaced or needs to be replaced. If the cracks are large and need more than two inches of material to repair, a concrete replacement might be a better option. But if the cracks are visible and the slab is still structurally sound, concrete resurfacing is a more ideal solution.
    • The cause of the damage — Once you have looked at the extent of the damage, you need to identify the cause. If there are tree roots under the concrete, if you see signs of erosion, or you notice any indications of repeated exposure to extreme weather conditions, you might be better off replacing the entire slab.

    Be sure to speak to a professional for more information.

    The Advantages of Waterproofing a Concrete Surface

    Our coating process involves the use of a tough fiberglass deck coating that has been reinforced with a metal lath, and it can be used over both new and previously-coated concrete surfaces. It will give you a durable deck that’s waterproof and resistant to degradation caused by UV radiation and freeze-thaw cycles. It will also provide a Class A and one hour fire resistant assembly. Our system is considered to be one of the fastest of its type on the market, with typical installations being completed in 1-2 days. This keeps labor costs down, which makes customers happy and construction schedules on track.

    This three-step deck coating system can be used on practically any walking surface and can even be applied to plywood (in addition to concrete). We can also apply the coating over other deck surfaces (such as magnesite, diato, elastomeric, epoxy stone, and tiled decks). It has been in use since the early 1980’s, so it has been proven to create waterproofed surfaces that will stand the test of time.

    If you’re looking for one of the best places for deck waterproofing in Los Angeles, be sure to reach out to the Fiber Coat Deck Company.


  3. 8 Important Considerations Before Installing an Epoxy Flooring System

    Concrete floors that are coated with epoxy are extremely durable, which makes it an ideal solution for industrial settings. They’re resistant to damage from chemicals. They can also be color coated for maximum flexibility and efficiency. They can even be modified to fit the activity in the room. Epoxy flooring is a popular solution for large-scale commercial and industrial facilities, and it has a number of benefits. It’s durable, slip-resistant, and can have an attractive finish. But if you’re a property manager who needs to oversee large-scale epoxy flooring projects, you need to understand some of the important considerations when it comes to this type of flooring.

    epoxy installers

    Here are some important things you need to consider before you install an epoxy flooring system.

    #1: Color Coating

    Epoxy flooring can be color coated to designate specific purposes for each area of the floor. By creating “work zones,” you can control the flow of traffic in the area. This can reduce the number of work-related accidents and incidents, which can improve your company’s safety record. You can use color coatings to keep workers away from high-risk areas. You can even use it to create a continuous pathway through the building, so visitors and clients don’t get lost.

    #2: Chemical Resistance

    Depending on the types of chemicals your company uses, your facility may need to have some extra protection. Epoxy flooring can be customized in a way that makes it more resistant to damage from spills and the regular use of harsh chemicals, which can prevent structural damage that can occur over time.

    #3: Reflectiveness

    Because of its reflective quality, epoxy flooring can improve visibility without the need for additional lighting. Not only can it make doing intricate jobs easier, but it can also make the area safer for workers. Because you will be reducing your dependence on overhead lighting, you can save money on your electricity bills.

    #4: Flexibility of Purpose

    Epoxy flooring can be customized to fit the needs of the people using the area. Automotive rooms need to have decorative finishing touches that can make the floors look beautiful — all while giving it the durability it needs to withstand the constant pressure of heavy automobiles. If the epoxy is being installed in an industrial kitchen and bathroom, it may need to be resistant to moisture and chemicals to protect the structure of the building and the concrete underneath.

    #5: Activity of the Area

    Ask yourself what you’ll be using the area for. Will you be driving forklifts or steel wheel carts in the area? How cold will the area been while it’s in use and while it’s not in use? You may need an epoxy flooring solution that will give you some slip resistance. A number of factors can play an important role in the type of epoxy flooring you need for the area. Some of them include the following:

    • Room temperature.
    • Operational temperature.
    • Traffic.
    • Exposure to chemicals.

    Thinking about these things will help you to find the right product, thickness, and application method to fit your unique environment.

    #6: Condition of the Concrete

    Before you can install epoxy flooring in a specific area, you need to understand the amount of corrosion that exists in that space. Smooth concrete has no visible aggregates, but you may see some small cracks. Aggregates can be small (where some rock is exposed) or large (where large amounts of rock are exposed). Areas with cracks and small or large aggregates must be prefilled before the epoxy coating can be applied. It may take some extra time and materials, but proper preparation will make sure the coating has a longer life.

    #7: When the Area is Available for Downtime

    To install epoxy flooring, you’ll need to take the time to prepare the surface and apply the coating. It will also need some time to cure once it has been applied. Plan the installation for when the coating can have the longest time to cure, because it will be more resilient. Talk to the installer to figure out what time is best for you. Coatings can be installed during the week if you can shut down the space during that time. You can also have it installed during planned shutdowns, weekends, or holidays.

    #8: The Floor’s Drainage System

    If you plan to install epoxy flooring, now is the time to take care of any puddling issues or to install a new drain. A good installer will be able to pitch or build up your floor to make sure it stays completely dry, so be sure to mark out any of these areas.

    If you’re looking for one of the best places for epoxy flooring in Los Angeles, be sure to get in touch with the Fiber Coat Deck Company.


  4. What Kind of Businesses Can Benefit from a Deck Waterproofing System?

    If you own a commercial property, you want to make sure it’s in the best possible condition for your clients, customers, or tenants. Deck waterproofing is one of the best ways to do that. A lot of commercial properties have decks, and all of them want to make sure it’s as safe and attractive as possible. Whether you have a roof deck, plaza deck, balcony, or any similar surface, you need to make sure it’s properly sealed because it will preserve your building’s structural integrity.

    Unlike residential decks and floors, commercial surfaces experience a lot more foot traffic and wear from heavy equipment (in addition to regular exposure to rain and water). Because there’s so much surface that can get damaged, not taking steps to protect it can be detrimental to your business.

    industrial warehouse

    Types of Deck Waterproofing

    If you’re wondering if you can waterproof your deck, you may also be wondering if it really matters for your specific surface. Deck waterproofing can be done on several different surfaces. Some of them include the following:

    • Wood — If your commercial space has wood surfaces, you can find a waterproofing system that will work. Deck waterproofing is usually done on plywood surfaces, but it can be done on other types of wood surfaces as well.
    • Concrete — Depending on your deck’s specific needs, there’s also a waterproofing system for concrete. Be sure to speak to a professional to find the right solution for your business.

    Both of these decks can stand up to foot traffic, wear and tear from furniture, and a number of other things that commercial decks must endure.

    Benefits of Deck Waterproofing

    Waterproofing your commercial deck can benefit your business in a variety of ways. Some of them can include:

    • Durability — Deck waterproofing can protect the surface from spills that can stain or damage it. It also acts as a barrier from the elements, which can reduce weather damage.
    • Safety — Because it reduces the risk for damage, waterproofing your deck will make it safer to walk on. If you take this extra step, you’ll be keeping people safe by eliminating the possibility of slips and falls.
    • Longevity — Because it makes your deck more durable, waterproofing the surface will increase its lifespan.
    • Reduced Maintenance — Another result of improved durability is a reduction in maintenance costs. A deck that can hold up against the weather and is less likely to get damaged won’t need as much maintenance as one that hasn’t been waterproofed. So if you don’t take this extra measure, you may end up spending considerably more on repairs (especially if it hasn’t been properly maintained).
    • Aesthetic Appeal — Aside from all the practical benefits, deck waterproofing can also make it more pleasing to the eye. A deck that looks rough and worn out won’t look as good.

    These are some of the benefits of waterproofing your commercial deck. But whether they’re practical or aesthetic, there are many ways that deck waterproofing can benefit a commercial property.

    Businesses Where Deck Waterproofing Can be Beneficial

    Deck waterproofing can benefit a number of businesses. Some of them can include the following:

    • Restaurants.
    • Retail stores.
    • Hospitals and medical facilities.
    • Schools and universities.
    • Entertainment facilities.
    • Warehouses.
    • Food processors.
    • Industrial facilities.
    • High-rise buildings.
    • Office buildings
    • Apartment complexes.
    • Government buildings.
    • Non-profit facilities.
    • Airport, bus, and train terminals.

    Be sure to speak to a professional for more information.

    Determining if Your Deck Needs Waterproofing

    Now that you know about the benefits of deck waterproofing, you may still be wondering if it makes sense for your commercial property. Like any other job you need done, the first thing you want to see is a rough estimate of how much it’s going to cost and how long it’s going to take. The answer to this question will depend on the specific project.

    It can take anywhere from 13 to 45 minutes per coat to waterproof wood and concrete surfaces. But on average, you can expect to wait 1-2 hours for each coat to become dry to the touch. You can apply another coat after you have waited at least 12 hours after the previous coat has been applied, but it can take up to 72 hours for it to cure completely. Deck waterproofing systems can take about 5-7 days to install completely.

    If you’re looking for one of the best places for commercial deck waterproofing in Los Angeles, be sure to get in touch with the Fiber Coat Deck Company.


  5. The Versatility of Epoxy Resin in Commercial Applications

    Durability, aesthetics, and ease of maintenance are all important considerations when it comes to choosing the right flooring for a commercial space. Compared to other options, epoxy resin is a popular and practical choice that can be used in a variety of applications. Because of its numerous benefits and versatile nature, epoxy can be a reliable flooring solution that caters to the unique needs of different commercial environments.

    commercial epoxy floor coating

    What is Epoxy Resin?

    Epoxy resin is a type of adhesive that can be used in a number of industries and applications (both domestically and commercially). It’s also available in different grades and levels of brittleness. Epoxy resin is made of two different parts and is usually mixed in either a 2:1 or 4:1 resin-to-hardener ratio. The beneficial qualities of an epoxy resin floor include the following:

    • Toughness
    • Chemical resistance
    • Strong adhesion

    A lot of industries (including manufacturing and construction) use epoxy resin, but it can also be used in electronic applications (such as fiber optics and electrical circuit boards). It’s a two-part synthetic polymer that goes through a chemical reaction when they’re mixed together, which results in a strong and durable adhesive material.

    Using Epoxy Resin Safely

    There are some safety precautions you should think about when using epoxy resin. The first and most obvious one is hand protection, which is why you should always wear gloves to keep them from getting exposed to the resin and other hardening liquids. Nitrile gloves are less likely to cause a reaction when they come in contact with your skin or the resin, so they would be your best choice.

    You should also wear a plastic apron because it will allow resin spills to be easily removed, and you should wear safety goggles to protect your eyes. If the resin makes contact with your eyes, you should repeatedly flush them with water for 15 minutes. You should avoid rubbing them. You also want to seek medical attention at the earliest opportunity.

    Where Epoxy Resin Can Be Used

    Epoxy resin can be used in a variety of industries and applications. Some of them include the following:

    • Warehouses and Industrial Facilities — These types of businesses often experience heavy traffic, frequent use of heavy equipment, and exposure to chemicals. An epoxy resin floor can provide a durable and resilient surface that can stand up to the demands of these environments. Its seamless and non-porous nature makes it resistant to stains, spills, and chemical damage. Because of its anti-slip properties, epoxy floors can also improve safety by reducing the risk of slips and falls.
    • Retail and Commercial Spaces — Epoxy floors have become more popular in these types of spaces because of their ability to create a visual appeal while also maintaining a professional ambiance. Epoxy resin can be used to create a variety of designs and patterns. It can also come in a variety of colors. This will allow these types of businesses to customize their floors according to their brand identity or desired aesthetic. It can be made to look like polished concrete and can even incorporate different decorative elements (such as logos, graphics, and other unique patterns).
    • Healthcare and Pharmaceutical Facilities — These types of environments require a flooring solution that places a high priority on hygiene, cleanliness, and ease of maintenance. An epoxy resin floor is a practical choice for these types of settings because it can provide a smooth, non-porous surface that’s resistant to bacteria, mold, and moisture. Its seamless installation can also prevent the accumulation of dirt, dust, and allergens (which adds an extra layer of protection from harmful pathogens).
    • Educational Institutions — Epoxy floors are perfect for schools, colleges, and universities because of their ability to withstand heavy foot traffic and daily wear and tear. Their durability makes it a great choice for hallways, classrooms, cafeterias, and gymnasiums (where durability and impact resistance are essential). They can also be customized with a number of colors and patterns, so they can be used to create amazing spaces for both students and staff.
    • Automotive Facilities and Showrooms — Car dealerships, showrooms, and auto service centers need a flooring solution that can handle the weight and movement of vehicles. But, it also needs to maintain a sleek and professional appearance. An epoxy resin floor can give these spaces a seamless, high-gloss finish that can enhance their aesthetic appeal. It’s resistant to automotive fluids (including oils, gasoline, and brake fluids), which makes it easier to clean and maintain. Its reflective surface can also enhance the lighting of a showroom, which can create a more attractive display for vehicles.

    If you’re looking for one of the best places to install an epoxy floor in Los Angeles, be sure to reach out to the Fiber Coat Deck Company.


  6. Signs That Your Pool Deck Needs to be Repaired or Replaced

    Pools can come in many different shapes and sizes, but the one thing they all have in common is a pool deck (which has a dual purpose). Not only does it give swimmers a way to access the pool, but it’s also there to keep dirt from making its way inside the pool. Whether it’s made out of wood, concrete, or tile, the time may come when it needs to be repaired or replaced. It’s not always easy to spot the warning signs of a bad pool deck.

    When Your Pool Deck Needs Minor Repairs

    A concrete pool deck may experience a series of issues that can be fixed with some minor repairs. Recoloring, re-polishing, or resealing concrete surfaces are common fixes that can be applied. Here are some of the signs that your pool deck is in need of minor repair:

    • Stubborn stains on the surface — Pool decks usually have sealers, which are there for both protective and aesthetic purposes. Dirt and mud stains won’t damage the coating very easily, but they can cause it to fade over time. Even if the average pool deck sealer can last for several years, it’s a good idea to apply a new layer as soon as you see lingering stains.
    • Loss of color — Color fading on the top of the pool deck is a sign that it needs to be resealed. If you have water-based stains or dyes that give the surface its color, you will need to apply a layer of top coating to seal them in. Stains and dyes will fade if they’re exposed to too much sunlight, and color fading is a sign that the topcoat is starting to dissolve away from the surface.
    • A slippery surface — If the surface of your pool deck feels slimy or limey when your toes touch the surface, it’s a clear sign that it needs a new coating. This is what gives the deck surface its water resistance, and it can fade or thin out over time. This will allow the top layer to absorb water, so you want to apply a new layer of coating on the deck as soon as you notice this problem.
    apartment pool concrete

    When Your Pool Deck is in Need of Major Repair

    While some issues can be fixed with minor pool deck repair, other problems are more serious and will require the help of a professional. The sooner you find them, the better. Here are some of the signs that your pool deck is need of major repair:

    • Discoloration — This type of discoloration is worse than seeing mud or soil stains that are smudging up the surface. It shows up through the presence of a a translucent, dark stain that appears to penetrate deep into the concrete layer. It’s caused by an unseen crack located somewhere underneath the concrete, which might have happened because the coating is gone completely.
    • A moldy surface — Mold can grow on your pool deck whether you live in a humid area or not. This is often caused by water that splashes outside the pool basin, and the deck surrounding it usually doesn’t have enough time to dry. If the mold doesn’t seem to go away after you have cleaned and polished the surface, it’s a sign that you have a more serious problem.
    • An uneven pool deck — If you step onto a spot on your pool deck where the concrete seemed to move, it’s a sign of an uneven surface. It’s caused by a major crack that’s causing the concrete to crumble. If you see this problem, you need to contact a professional to get it repaired.

    Water can leak into the ground, which can cause the soil under the slab to come loose or soften. This can eventually cause the concrete to crack. One of the ways that this can be repaired is through slab jacking, where the sinking slab is lifted back up so it’s level with the rest of the pool deck. You also need to be aware that not all types of pool deck damage are caused by human activity. Sometimes, the moving ground is caused by natural occurrences within the soil.

    If you have a pool deck in Los Angeles that needs to be repaired, be sure to get in touch with the Fiber Coat Deck Company. We have a team of experienced professionals who would be happy to speak with you about your specific needs.


  7. 7 Ways That Deck Waterproofing Can Protect Your Property

    Waterproofing is an important part of deck maintenance. If you put a little extra effort early on, you can save both time and money over the long term. Deck waterproofing can keep it from warping or forming dry rot, which will save you from making costly repairs later on. Water damage can be expensive to repair. In fact, most property owners will spend thousands of dollars to fix water damage. If you don’t take some steps before the next storm hits, you may find yourself struggling to pay for the cost of fixing a major problem.

    Here are some of the reasons that deck waterproofing can protect your property.

    water proof fiber coat

    #1: It Can Extend the Life of Joists and Beams

    Moisture can get trapped between joists and beams inside the deck, which can lead to structural problems. This type of issue can lead to decay and rot, because prolonged exposure to water and leaves that get stuck inside the decking can make the problem worse. If your deck’s structural integrity has been compromised, the risk of injury or even death will increase. You can keep your deck structure from getting water damage by hiring a professional to flash the joints and beams. Sealing the deck screws will create a barrier between materials, which will protect it from water damage.

    #2: It Can Improve Durability

    Waterproofing your deck will improve its durability, which can increase its lifespan and reduce the need for more frequent maintenance. If your deck is more durable, it will be safer for everyone who uses it. Deck waterproofing is a smart way to make your deck last longer. Not only will it make your property safer, but it will also save you from making expensive repairs later on.

    #3: It Can Provide Protection from Weather

    Once a storm comes in, your deck is more likely to get damaged. Wood boards that are splintered, cracked, warped, soft, and spongy can be a structural risk. Without waterproofing, your deck is more likely to experience wood rot. If you think you can make it through the sunny weather without investing in deck waterproofing, you should know that there are risks involved in waiting. The longer you put it off, the greater your chances are of getting mold and mildew. Not to mention, all the UV rays that can damage your property as well.

    #4: It Can Improve Your Property’s Aesthetic

    Building your deck to make it waterproof is more critical than any other part of your property, especially if you want to improve its aesthetic. A rotting and damaged deck can make your property look cheap and unsafe. It doesn’t look pleasing to the eye, and it shows a clear risk of excessive use. You didn’t build a deck on your property so you can let it go to waste, and you don’t have to. Deck waterproofing is a great way to make your property safer and more aesthetically pleasing, which can save you money in the long run.

    #5: It Can Reduce the Need for Repair and Maintenance

    Once a professional comes out to waterproof your deck, you will only need to perform a quick sweep and some cleaning a few times a year. Otherwise, you may be forced to maintain your deck before and after every storm. The coating used in deck waterproofing will make it look nice without a lot of effort on your part. So instead of performing annual maintenance, you can shift your focus on other areas of your property.

    #6: It Can Limit the Number of Leaks

    Waterproofing will limit the number of leaks that will show up on your deck. A professional will know how to install the deck in a way that will minimize its exposure to water, which will prevent leaks that can cause mold and rot to form between materials. Deck waterproofing will do more than just prevent leaks. It will also protect your property from water damage.

    #7: It Can Reduce the Chance for Slips and Falls

    Your deck can get slippery when it’s wet, which will increase the risk of slips and falls. Injuries caused by deck-related structural issues are more common than you think. The U.S. Product Safety Commission (CPSC) showed that there were approximately 4,600 ER visits related to decks collapsing from 2001 to 2016. You can reduce the risk of injury and death from these issues by waterproofing your deck. If you don’t act quickly enough and someone gets hurt, you could be held liable. So, save yourself the stress of a lawsuit and hospital bills by investing in deck waterproofing.

    If you’re looking for one of the best places for deck waterproofing in Los Angeles, be sure to reach out to the Fiber Coat Deck Company.


  8. 4 Advantages of Epoxy Floor Coating for Commercial Settings

    A good flooring system is the foundation for any commercial business. Whether it’s an office, a factory, or a warehouse, the floor will experience a great deal of wear and tear. Epoxy floor coating is a great choice for commercial settings, especially industrial spaces or areas that experience a great deal of traffic. Epoxy flooring can turn even the most beaten-up floor into something that will enhance the look of your business without costing a great deal of money. It’s a fast upgrade for standard concrete floors, and it’s a relatively simple fix for damaged or old floors (especially when you compare it to the cost of pouring a new slab or resurfacing a substrate).

    Here are some of the advantages of epoxy floor coating for commercial spaces.

    epoxy safety garage

    #1: It Can Save Your Business Money

    The goal of any business owner is to run a successful company. While the definition of success can be different for each individual, it all comes down to the bottom line because a company needs to earn a profit if it wants to succeed. That’s why business owners must look at their options carefully before they make a financial decision. This includes choosing the best and most cost-effective flooring option for their building.

    The flooring system must not only be effective in your space but must also last a long time. That’s why using a high-quality, durable material is important. It must be able to withstand the pressure of your business, which is why many business owners see the benefits of epoxy floor coating. Compared to other flooring solutions, the cost of epoxy is hard to match. And the reason for its affordability is because it’s installed on top of your existing floor. Whether your commercial space uses wood or concrete, the cost of installing epoxy is much lower than all the others.

    #2: It Offers the Look of Quality

    Commercial and industrial spaces need to have sustainable flooring, but it also needs to enhance the building’s overall aesthetics. Your customers need to see what a thriving business looks like, and epoxy flooring will accomplish that. It can transform dull, drab concrete into a floor that looks intricate and stunning. Compared to your typical warehouse floor, an epoxy floor coating will look bright and inviting. Its professional appearance will draw people in and will showcase your company’s excellence.

    #3: It Comes in a Variety of Colors and Styles

    Applying epoxy to your concrete floor can give your commercial space a fresh new look, and that’s before any colors or fillers are added to change how it looks. Epoxy is often used by companies for branding as well as safety, which is made possible by the variety of colors and styles that can add a decorative element to a concrete floor.

    The smooth, flawless shine of epoxy floor coating will make your workspace look more elegant, and work areas can be customized as well. Texture will often get added to give the floor an extra later of safety, but it can also add an extra design element. Epoxy flooring is a cost-effective way to update dull concrete and add more atmosphere to your workspace.

    #4: It Offers Excellent Durability

    Epoxy floor coating is strong, so durability is one of its benefits. In fact, it lasts much longer than almost every other commercial flooring solution on the market. The only thing that last longer than epoxy is the concrete itself, which still needs to be sealed and maintained to keep it sustainable. Because epoxy flooring requires a concrete substrate to be built below it, it has an incredible amount of strength. It can handle the pressures of heavy machinery, heavy traffic, drops, spills, and even leaks.

    If it has been properly installed, epoxy floor coating will outlast many other types of concrete flooring. Making sure you have a correct installation will make it last longer and will minimize your chance for peels, flakes, and cracks. If it has been properly installed, epoxy flooring can last up to several decades. Both that and its durability make epoxy floor coating a popular choice for commercial and industrial businesses.

    If you own a commercial or industrial building and are looking for one of the best places to install and maintain epoxy flooring in Los Angeles, be sure to reach out to the Fiber Coat Deck Company. We have a team of people who would be happy to speak with you about your specific needs!


  9. 5 Reasons to Have Your Decking Inspected

    Decks can get beaten up on a regular basis. They can be exposed to sunlight, rain, and other exterior elements throughout the year, which can lead to accident-causing damage. According to the Consumer Product Safety Commission (CPSC), an average of 33,000 people a year get injured because decks, porches, railings, or staircases experience structural failure or total collapse (with 6,000 of them suffering from traumatic injuries). That’s why you shouldn’t ignore the warning signs and should take care of any problems before they become dangerous.

    Here are some of the reasons to have your decking inspected.

    hole in plywood decking

    #1: You See Rusted Fasteners and Connectors

    You should look under your deck to see if the fasteners and connectors are still in good shape, because they play an important role in keeping everything together. All the nails, screws, and hangers are made of galvanized steel, but they still need to be inspected.

    #2: There’s Damage Caused by Insects

    Any decks that have been made since the 1980’s are made with lumber that has been treated with insect-resistant chemicals. But before then, they were often built with rot-resistant redwood. Out of the 50 million decks in North America, 20-25 million of them are at least 30 years old. House construction materials aren’t usually treated with insect-resistant chemicals, so carpenter ants or termites can get into areas where a new deck made with treated wood is attached to the property. Once that happens, even the most structurally sound deck can pull away from the main structure and cause an accident.

    You can look for this problem by paying attention when you first step onto the deck. It should be in the same position as it was when it was first built. If it has any give or you can see shifting from how it was originally connected, you should contact a professional to have it inspected as soon as possible.

    #3: It Has Cracks

    Normal wear and tear can cause wood to split, but some cracks can be an indication of a larger problem. If they’re small, there’s no need to worry. But you should still keep an eye on them. If you see any of them getting bigger or are around fasteners, it’s a sign of weakness. Water can get into smaller cracks, which can cause them to expand. I You also want to pay attention to cracks located in the middle of a deck-joist span.

    Decks are usually built on joists that are spaced 16 or 24 inches apart, depending on local regulations. The midpoint between each joist can be a spot for potential weakness, so any cracks located in these areas can be dangerous. Any deck board with a crack in that area needs to be replaced, so no one will step on that spot and go crashing through the entire deck.

    Because decks have to endure a great deal of exposure to the elements, you should stain it at least every few years to keep cracks and other problems from occurring. You don’t want to power wash a wooden deck, because it will rip through the fibers. Even if you stain it afterwards, the surface of the wood has already been weakened. Some light brushing at low pressure is good enough for cleaning a deck, but a lot of people will crank up the pressure so they can get faster results.

    #4: The Wood is Rotted

    A little bit of rotting wood may not seem like that big of a deal, but it’s something that requires immediate attention. Rotted wood is like looking at bald tires. If one part looks fine but another area looks bad, there’s still a problem. That’s why staining it every few years is so important.

    old decking

    #5: The Deck Railing is Loose

    The deck railing is more than just a place where people can lean on. It also gives the deck a border (like lines on a highway), which makes it an important safety feature. The average person should be able to lean against a railing and feel a little bit of give. But if it sways when you push on it, you should have it inspected as soon as possible.

    Like any other stairway, deck stairs need railings. But while deck railings encourage people to lean on them, deck-stair railings are meant for grasping. It has to be strong enough for people to grab onto it for support, so it must be able to hold them up. Deck-stair railings don’t have to withstand as much lateral force, but any swaying or wobbling is a cause for concern.

    If you have a commercial deck in Los Angeles that you want inspected, be sure to reach out to the Fiber Coat Deck Company.


  10. The Pros and Cons of Epoxy Floor Coating

    Epoxy floor coating is one of the most popular flooring solutions for commercial and industrial facilities, but it has also grown in demand for residential properties. There’s no such thing as a perfect flooring solution, but the advantages of epoxy resin outweigh the drawbacks in a lot of applications. You can use epoxy floor coating in a variety of settings, which is why it has become such a popular option. But like many other flooring solutions, it’s important to understand its pros and cons.

    commercial epoxy coating

    Advantages to Epoxy Flooring

    Here are some of the advantages of epoxy floor coating:

    • Excellent Durability — Epoxy flooring can last for a long time. But as you’re researching its average lifespan, you will find a lot of different quotes. The durability of epoxy floor coating will depend on where it has been applied and whether it was properly installed, but it’s resistant to all kinds of wear and tear (including peels, cracks, and corrosion). It can even withstand some chemical damage once it has been cured.
    • Affordability — Compared to other solutions, epoxy flooring will have a lower overall cost.  Part of this is because it can be laid over existing concrete. The upfront cost for epoxy will be higher than concrete polishing. But if you need to replace it, the cost will be lower.
    • Customizable Options — Epoxy flooring gives you the option to create a variety of designs and aesthetic solutions. You have an endless choice of color. The material also has the ability to make intricate patterns and geometric shapes. You can even give it a metallic look.
    • Damage Resistance — Unlike many other flooring solutions used on residential and commercial spaces, epoxy coating won’t be susceptible to the kind of damage that’s often a result of normal wear and tear. It won’t crack, peel, or erode like laminate, wood, or other flooring systems. Cured epoxy is resistant to moisture and can withstand a great deal of weight.
    • Weather Resistance — Epoxy can hold up against temperatures from below 0 degrees to above 140 degrees Fahrenheit. It’s also resistant to fire damage, which makes it a great choice for both indoor and outdoor applications.
    • Stain Resistance — Because epoxy creates a tight seal that won’t absorb fluids, most things will just sit on the surface. There won’t be any stains where gasoline, oil, or chemicals have spilled.
    • Easy Maintenance — Once it has been applied to the concrete, epoxy doesn’t require a great deal of maintenance. Once it dries, it creates a smooth and seamless finish that’s resistant to the penetration of dirt, oil, and other spills that can damage a floor’s surface. This makes epoxy flooring easy to clean, which you can do with regular sweeping and mopping.

    Feel free to speak to a professional for more information about the advantages of epoxy flooring.

    Disadvantages of Epoxy Flooring

    While epoxy flooring has its advantages, it does have its drawbacks. Some of them can include the following:

    • Demanding Installation Process — The preparation process for installing epoxy floor coating can take a great deal of time. Not only do you have to prep the surface, but you also have to remove any underlying substances (such as oil or grease). The installation process must also follow the required rules, and one of them may involve checking the humidity levels. If the air has too much moisture, the end result will look damaged (which will cause the floor to age more quickly).
    • Slippery Material — Because it has a non-porous and seamless structure, epoxy flooring can have a slippery surface. This is especially true if it gets wet or oily. You may, however, be able to make it less slippery or not slippery at all for an additional cost.
    • Long Curing Time — Once you have installed epoxy flooring, you will have to wait a few days for it to completely cure. Some installations may require up to a week for complete drying and curing, which can be an inconvenience for some property owners.
    • Temporary Flooring Solution — While epoxy is durable and resistant, you will have to replace it eventually. Unlike other flooring options, normal wear and tear can take its toll on epoxy floors. If you want to keep it looking good, you will have to put down a new coat of epoxy (especially if heavy items get dropped onto the floor’s surface).
    • Smell — Wet epoxy has strong fumes, especially if you’re using a darker shade (which has more hardeners).
    • Moisture — Because it doesn’t breathe after it cures, any moisture that’s trapped below the surface of an epoxy floor coating can become problematic once it evaporates. It can even lead to the eventual need for repair or refinishing as bubbling or buckling in the flooring material can occur.

    If you’re looking for one of the best places for epoxy flooring in Los Angeles, be sure to get in touch with the Fiber Coat Deck Company.



Fiber-Coat Deck Co
1635 W Lambert Rd Unit B
La Habra, CA 90631
© 2024 Fiber-Coat Deck Co All Rights Reserved.